Very Amateur Astronomy

A weekend of mixed results, though with two excellent nights I had hoped for more, however I tripped over myself a bit and made some mistakes plus I had some interesting software problems. Perhaps ‘annoying’ would be a better description than ‘interesting’.

The plan was to pick a target and use both nights to do a proper study, my experience with imaging andromeda has taught me to spend more time and gather more images. More frames means more details and a better signal to noise ratio. However before I could do anything I needed to get everything setup and working again.

First thing was to setup the guide scope, previously I have used the Vixen A70LF for this purpose but decided in this case to try out the William Optics ZS66SD instead. I also had to get the mount properly aligned. All of this took a while and I was running a bit behind schedule by the time I started imaging.

This was the point I ran into problem number one, though it took me a while to work out the cause of the issue. Basically the guiding was terrible, lots of shift in various directions causing a bunch of nasty issues. there were a few causes for this :

Guide Scope Setup

I had used the ZS66 with the webcam, but had ran into problems getting the webcam to reach focus. Without thinking about it I used the 0.6 focal reducer to make life easier, without doing the math. This made the field of view of the guide scope way wider than that of the imaging camera. Not good, the guide software had problems making the scope move enough to register a change with out the adjustment speed being pushed right up and that meant it was constantly over running. I fixed this by using a diagonal to increase the focus length in order for the webcam to focus without the reducer, but I still think the zs66 is to wide field for the purpose.

Software Problems

I had originally used PHD Guiding for control, but I kept having problems with it even with the issues above resolved, and on the second night when I changed back to the Vixen scope for guiding. I found PHD was constantly dropping frames from the webcam, sometimes several in a row which was resulting in poor guiding. Even when it did seem to be guiding correctly the images coming back were of very poor quality with unexplained shifts (with the ZS66 anyway may be the field of view again). On the second night I tried Guidedog instead. Whilst the guiding was not perfect, it was certainly much better than I had got out of PHD.

So lots of testing, setup, changes, adjustments and general mucking about resulting in me only getting just over 2 hours 20 minutes of data back. Not quite the 8 hours I had been hoping for. The result is not one of my best :

Triangulum Galaxy

• Orion Optics 250mm F4.7 Reflector
• Vixen Sphinx Mount
• Canon EOS 1000D @ iso 800
• 29 x 5 minute exposures (plus darks & flats)

Not my best work, but it will be improved with the addition of more data on the next clear night.

I had another go at the ISS last night, this time with the 2x barlow in place in an attempt to achieve higher magnification :

• Exposure 1/1500
• Gain 50
• Brightness 60

I think that’s gone a bit above the limit of the webcam. I can’t increase the exposure any further without getting blurring, which means I have to increase the gain which in turn produces to much noise. Still it has been a very production week for imaging for me.

The next experiment now I have the UV/IR cut filter is to look at using EOS movie record to capture the AVI through the barlow and see what magnification I get with that combination. The better chip and better control should allow for a better image, but I think any targets will be to small. I may need to keep an eye out for a higher magnification barlow for this option.

I also want to try the webcam, through the barlow but with my 0.6 reducer attached as well. I may well be getting carried away there though. The ideal would be an imaging source camera, add yet another item to the shopping list!

Continuing my exploration of webcam astrophotography I have had a couple of goes at capturing the ISS as it has been very bright for us in south east England over the last few nights. The best efforts came from last night.

Some good detail captured there, so I’m happy with that! The equipment and settings used are as follows :

• Orion Optics Europa 250mm Reflector
• Manually guided on the Vixen Sphinx mount
• Philips SPC900NC webcam (Exp 1/2500 – Gain 40 – Bright 60)

I captured around 2000 frames of which about 50 contained the target, any sequential runs of four or more were exported and stacked in Registax. I applied a gentle wavelets filter to bring out the detail, then a very soft gaussian blur to clean them up.

Tonight I may go completely mad and try it with the 2x barlow!

Last night I spent a bit more time working on the Andromeda image in Pixinsight to sort out the colour, boost the saturation and remove a bit more noise from the image. I’m now finished I think, and I have to admit to be very pleased with the result.

Here is a close up of the core cropped from the full size original image. You can see detail right down to the centre.

My next challenge will be to improve my knowledge and skills of the software by reprocessing some of my older images. I can’t wait to see what lies hidden behind my previous dodgy versions!

I’m never happy with my processing, and I’m always looking for a better way. On the strength of various threads on the Stargazers Lounge forum I decided to have a go with the Pixinsight astronomy image processing suite, following the excellent video guides from Harry Page. Here is the result :

You can see I have managed to create a significantly more subtle image, and retained detail right down to the core. I’ve got to say I am hugely impressed with pixinsight, everything just seemed to come together so much easier!

I’ve been meaning to give this a go for a while, but the lure of deep sky has kept me from it so far. Unfortunately however, I broke the starbook controller for my mount last weekend and it’s away for repairs, and with out that the mount won’t do anything useful at all.

Still, looking at it as an opportunity to try something new, and understanding that in webcam astrophotography only short exposures are required, I decided to see what I could do with Jupiter.

Not bad for a first attempt really, you can at least tell what it is! This is Jupiter compiled from about three and a half minutes of video captured my my Philips SPC900NC webcam and stacking in registax 5.

To improve the image I’m going to need to zoom it in a bit more, which means a barlow, which I have. But will also require an IR filter as passing light through a lens causes the infra red light to scatter, making focus very nearly impossible to reach. So that’s the next item on the shopping list.

So, it’s been a bit quite here recently as August was a very busy month. Myself, my wife and my three year old son drove the 1000 miles or so from Basingstoke to north Italy for a two week holiday in the lakes. Specifically we stayed at the wonderful Camping Al Sole on the beautiful Lago Di Ledro, not far from the north tip of Lago di Garda. We had a fantastic time, visited various castles, swam in the lake a lot and I of course got some imaging done.

I took my Vixen Sphinx mount on it’s portable pier setup, and a lovely little William Optics ZS66SD telescope with the 0.6x Focal Reducer and flattener. I was tied to the tent unfortunately as I ran out of space in the car for a portable power supply, but as we were 2000ft up in the mountains it wasn’t the worst thing, at least I had a bottle of wine close to hand. The seeing was excellent even with the camp sites bright white globe lights, and Andromeda was the best target in the clear view between the trees. Here is the result :

• William Optics ZS66SD / 0.6x Focal Reducer / Flattener
• Canon EOS 1000D – unmodified
• Vixen Sphinx Mount – no guiding
• 93 x 2.30 exposures / 3h 52m total exposure time
• Stacked in Iris

The critical viewer will note that on this processing attempt I’ve made a few mistakes, noticeably I’ve over done the white point resulting in some nasty looking stars and wiping out detail in some areas. Also I think my flats have been incorrect, I’ll be taking some more tonight to get the exposure level better and recompiling the image.

Unfortunately I managed to damage my Starbook over the weekend so I’ll be out of action on the deep space imaging until it is repaired. I’m not sure if Jupiter is in a suitable position for imaging with the webcam right now either but I’ll be giving it a go.